Calls drop after about 30 seconds, or a few minutes in
A call that drops at the same point every time is almost always the router. Here's what to change.
If calls connect fine but cut off at about the same point each time (often around 30 seconds, or after a few minutes), the office router or firewall is almost always the cause. Two settings fix most of these.
1. Turn off SIP ALG
SIP ALG (sometimes called SIP helper or SIP inspection) rewrites call traffic and commonly breaks calls part-way through. Turn it off on the router or firewall.
2. Let calls stay connected
Routers forget a connection that goes quiet for a while. For calls, the router needs to keep UDP sessions open for at least 300 seconds before timing them out. Ask whoever manages your network to set that.
How to confirm it's a dropped call
In the portal, open Calls and click the call:
- A Cut off tag means it was answered, then ended by the network or a timeout rather than a person.
- How it ended says, in a sentence, who ended it and why.
The full list of what your network has to allow is on Account Settings > General > Network requirements (administrators can see it).
If calls still drop after both changes, contact support with the time of a dropped call.
