Cannon VoIP Help

People can't hear me, or I can't hear them: step-by-step checks

Check the microphone, the network check and the router, in order, when sound only goes one way or not at all.

Updated 1 week ago

When a call connects but sound only goes one way, work through these checks in order. Stop at the first one that finds something.

1. Is it the microphone or the headset?

  • Desk phone: check Mute isn't lit, then try the handset in case the headset is the problem.
  • Phone app (Android): open More > Account. Under This phone, Microphone must show on. If it shows Fix, tap it. While it's off, every call is one-way silence.
  • Computer app or web phone: a blocked or busy microphone shows a message on the call. See The computer app can't use my microphone and They can't hear me on the computer.

If it's fine on one device but not another on the same network, the device is the problem. If it's bad on every device at one site, keep going: it's the network.

2. Run the network check

Run it on the device that has the problem, on the network where it happens:

  • Phone app: More > Account, under Network, tap Check network connection.
  • Computer app: Settings > Account, under Network, click Check network connection.

If it reports DOUBLE NAT, two routers are translating the connection, a common cause of one-way audio. See The network check says DOUBLE NAT (two routers).

3. Check the router

  • Turn off SIP ALG on the router or firewall. See What SIP ALG is, and why to turn it off.
  • Give your IT team the list on Account Settings > General > Network requirements. See What our IT team needs to allow through the firewall.

4. For an administrator: look at the call

  1. Open Calls, click the call, and look at Call quality.
  2. Open Call trace. It shows each step of the call, and if one failed it says Failed at step and why. When a desk phone sent its own report, it's listed there too.
  3. On Team, press Manage on the person and open Network history. It lists what their apps reported, both During a call and from each Network check, with dates.

5. A desk phone that can't reach things

On Extensions & Phones, Phones tab, click the phone and press This phone. Ping from this phone makes the phone itself test an address from its own network. Use the Router, Internet or Cannon VoIP buttons, or type an address. It needs VoIP-6 firmware 3.3.2 or newer, and the phone picks the request up within about a minute.

Still happening?

Note the time and the number you were talking to and open a support ticket. We can look at that exact call.

Was this helpful?
← All help articles