Cannon VoIP Help

Choppy or robotic audio: what jitter, packet loss and latency mean

The three numbers on a call's quality box, what each does to a call, and what to fix.

Updated 1 week ago

When you open a call on the Calls page in the portal, the Call quality box can show three measurements. Each one hurts a call in its own way.

| Measurement | What you hear | Good | The apps warn above | | --- | --- | --- | --- | | Packet loss | Words drop out, robotic sound | under 1% | 5% | | Jitter | Choppy, uneven audio | under 30 ms | 60 ms | | Latency | You talk over each other | under 150 ms | 300 ms |

The apps show the same warning during a call, for example "Bad Wi-Fi connection - packet loss 12% (should be under 1%); words may drop out."

What usually causes it

  • Weak or busy Wi-Fi. The biggest cause of loss and jitter. Move closer to the router, or use a network cable on a computer.
  • Someone else using the connection hard. Large uploads, backups or video streaming on the same internet line.
  • A long route. High latency on its own can mean a VPN or a remote desktop session in the middle of the call.

What to do

  1. Run the network check on the device that sounds bad (More > Account > Network in the phone app, Settings > Account > Network in the computer app).
  2. In the phone app, if the building's Wi-Fi is worse than the cell signal, set Prefer for calls to Cellular under More > Account > Network.
  3. Ask whoever manages your network to give call traffic priority. The Network requirements card in Account Settings lists the settings.

The computer app also notices on its own when a call keeps losing audio (8% or more for a few seconds) and finds the call a new path, up to twice per call.

Was this helpful?
← All help articles