Cannon VoIP Help

Connect a regular phone to a VoIP-ATA-1

Use a standard corded or cordless phone on the phone system with the adapter.

Updated 1 week ago

A VoIP-ATA-1 adapter lets an ordinary phone, the kind that plugs into a phone jack, work on your phone system as an extension.

Add it in the portal

  1. Go to Phone System > Extensions & Phones and open the Phones tab.
  2. Under Add a device, choose A phone.
  3. Pick the Extension it rings, choose VoIP-ATA-1 as the Model, and type the MAC address (on the sticker) under the adapter.
  4. Press Enroll phone.

Plug it in

  1. Plug the adapter into your router or switch with a network cable.
  2. Plug the phone's cord into the adapter's phone port.
  3. Power the adapter on. It sets itself up within a few minutes.

Pick up the phone and you should hear a dial tone. For a fax machine instead, see "Keep your fax machine with a VoIP-ATA-1".

Was this helpful?
← All help articles