Cannon VoIP Help

Desk phone VLAN and LLDP settings (for IT)

Put desk phones on a voice VLAN by hand or let the switch tell them.

Updated 1 week ago

These are on each phone's Settings > Network (or for every phone of a model, the Phone defaults tab), under Phone System > Extensions & Phones.

  • Ask the switch (LLDP): on by default. The phone asks the switch which VLAN to be on. Where your switch answers, this is better than typing a VLAN in by hand. The portal marks it "not bench-tested" on these phones.
  • Put the phone on a VLAN and Voice VLAN: tag the phone's own traffic with a VLAN you choose (1 to 4094).
  • PC port VLAN: the tag for whatever is plugged into the phone's PC port.

Be careful with a hand-typed VLAN. If it's wrong, the phone disappears from the network until someone resets it in person. Try it on one phone before you set it for the whole fleet.

VLAN priority shows "Not available on this phone" on the VoIP-6 and VoIP-12. Use the DSCP settings instead (see "Desk phone quality of service settings (for IT)").

Was this helpful?
← All help articles