Cannon VoIP Help

Set up emergency alerts for a school: first-day checklist

Everything to set up before the first lockdown or drill: phone locations, 911, groups, responders, panic keys, weather and a practice run.

Updated 1 week ago

Work through this list once, in order, and your school is ready for a lockdown, evacuation, panic or weather warning. You need to be an administrator.

1. Say where every desk phone is

A panic from a desk phone tells responders the building and room it came from, so fill this in first.

  1. In the portal, open Extensions & Phones and pick Phone map.
  2. Press Locations.
  3. Type each phone's Building, Floor and Room. A plain number gets its word, so 214 reads Room 214. To fill several at once, tick them and use Apply.
  4. Press Save changes.

2. Check your 911 addresses

  1. In Numbers, check that each address under 911 addresses shows Ready. A school with several buildings can also give each building its own address on Phone map > Buildings and 911.
  2. Dial 933 from a phone in each building. It reads back the address and number a real 911 call would send.

3. Choose who is told about a 911 call

In Numbers, under 911 callback number, press Who hears about a 911 call…, tick the front office and principal, and press Save who gets told. See Choose who is told when someone dials 911.

4. Turn on emergency alerts

Open Emergency (under Phone System) and press Turn on emergency alerts. Your school starts with four groups (Students, Parents, Faculty and Responders) and ready-made templates such as Lockdown: faculty and students, Lockdown: parent notice, Evacuate: faculty and students, Shelter in place, Early dismissal or closure, Medical emergency: responders and All clear: everyone.

5. Fill the groups

On the Groups tab, open each group:

  • Faculty and Responders: tick staff under Staff in this group. Responders are the people rung when someone presses panic.
  • Parents: People can sign themselves up is already ticked. Copy the Sign-up link into your enrollment packet, or use Import from a spreadsheet.

See Set up your emergency alert groups before you need them.

6. Set the panic rules

On Panic & responders, check the Panic reasons, the Responder group (Responders to start with) and Listen in to the room, then press Save reasons and Save responders. See Choose who gets the panic alarm.

7. Speakers and senders

  1. If you have overhead speakers, make a paging group on Paging & Bells first.
  2. On the Emergency Settings tab, pick the Default speakers for PA alerts and Who can send alerts, and press Save settings.

8. Panic keys on classroom phones

In Extensions & Phones, open an extension and add a Panic (a silent alarm to the responders) or Emergency (pick a reason on the screen, silently) key. See Add a panic or emergency key to a desk phone.

9. Weather

Open Weather, tick Severe weather warnings to everyone and pick a paging group under Read aloud over. See Severe weather and tornado warnings: what happens and what to do.

10. Practice

Turn on drill mode and run a lockdown drill. See Run and record an emergency drill.

Optional: connect door locks on Doors, webhooks & API (see Lock Verkada doors when you send a lockdown or Lock Kisi doors when you send a lockdown).

Was this helpful?
← All help articles