Moving offices: 911 addresses, desk phones, Wi-Fi and network
What to change before, on and after moving day so 911, the desk phones and sign-in all work at the new address.
Your phone system is in the cloud, so your numbers move with you. What changes is the address 911 sends and the network your phones plug into.
Before the move
- Get the new network ready. Send your IT person the list on Account Settings > General > Network requirements (Show the list). Ask them to turn off SIP ALG on the new router. See What our IT team needs to allow through the firewall.
- New Wi-Fi for the phones? On Account Settings > General > Phone Wi-Fi, type the new network name and password and press Save Wi-Fi. Do this before the old router goes, so phones already know the new network.
- Only allow sign-in from your office network? On Account Settings, add the new office's address to Network access (IP allow-list) before you move, or nobody can sign in from the new office. See Only allow sign-in from your office network.
- Back up your setup on Backups with a note like "Before the move".
On moving day: change the 911 address
- Open Numbers and find 911 addresses.
- Press Edit on Company address (or on the site that is moving) and type the new address.
- Save. It says "Saved. It is sent to the carrier now; Ready usually follows within minutes."
Until the address shows Ready, a 911 call from it reaches a national call centre instead of the local one. Press Check now to get the latest. See What the status next to a 911 address means.
Plug in and check
- Plug the phones in. They find their settings on their own.
- From a computer on the new network, open Extensions & Phones > Phones and press Check phones can fetch their settings.
- On a desk phone at the new office, dial
933. It reads back the address and number a 911 call would send. - Make a test call in and out, and check a transfer.
If a phone says it has no service, see My desk phone says No Service or Not assigned.
After the move
- Status & moves on Extensions & Phones lists phones that showed up on a new network or port.
- If you use the Phone map, upload the new floor plans and drag the phones onto them.
- Choppy or one-way audio at the new office usually means the router. See Call quality: choppy audio, one-way audio, drops.
Moving only some people
Keep the company address, add the new building on 911 addresses with Add a site…, and use Add someone… to move each person there. See Add a second office location.
Was this helpful?
