Cannon VoIP Help

No dial tone on a phone plugged into a VoIP-ATA-1

What to check when the phone or fax machine on an adapter is silent.

Updated 1 week ago

  1. Check the cables. The phone's cord goes in the adapter's phone port, and the adapter's network cable goes to your router or switch.
  2. Check the adapter in the portal. On Phone System > Extensions & Phones, Phones tab, find the adapter:
  3. - waiting for first boot: it hasn't collected its settings yet. A new adapter only looks for them when it powers up, so if it was already plugged in when you added it, unplug its power and plug it back in. - offline (or never online): it can't reach the phone system. Check the network it's plugged into has internet, then restart the adapter. - not provisioning: contact support.

  4. Restart it. Unplug the adapter's power for ten seconds and plug it back in.
  5. Try another phone. A different corded phone tells you whether the phone itself is the problem.

If it still has no dial tone, contact support.

Was this helpful?
← All help articles