Paging doesn't play: step-by-step checks
Check the group, the code, Do Not Disturb and the paging adapter when an overhead page or group page stays silent.
1. Did the page go out?
Send a test from Paging & Bells:
- Page everyone (All Call): type What should everyone hear? and press Send page. It says how many extensions were asked.
- A paging group: type What the page says and press Page on the group. It says how many phones were asked.
If it asked zero, or fewer than you expected, go to step 2.
2. Are the phones in the group?
Under Paging groups, press Edit on the group and check every phone that should hear it is ticked, including a PA-1 paging adapter's extension. Press Save changes.
3. Phones on a call or on Do Not Disturb
Normally phones on a call or set to Do Not Disturb are skipped. For a real emergency, tick Emergency - override Do Not Disturb and press Send emergency page. See Send an emergency page that breaks through Do Not Disturb.
4. Dialing the page from a phone
Dial the group's Code and talk. If nothing answers, check the code on the Dialing Guide, where every paging group is listed.
5. The overhead speakers (PA-1)
- Open Extensions & Phones, Phones tab, and click the PA-1.
- Press Diagnose. Registration must be good; if it isn't, see Desk phone says No Service or won't register: step-by-step checks.
- Dial the PA-1's own extension. Whatever you say should come over the speakers. If it does, the adapter works and the problem is the group.
See Set up a PA-1 paging adapter.
6. Talk-back doesn't work
People at member phones can only talk back when the group has Intercom (two-way talk-back) ticked. Off, it's a one-way announcement.
7. A bell or scheduled announcement didn't play
Under Bells & announcements, check the times and days, and Who hears it.
