Cannon VoIP Help

Phone Wi-Fi for desk phones

Put your office Wi-Fi on every Cannon desk phone with Wi-Fi, at sign-up or any time in Account Settings.

Updated 1 week ago

Cannon desk phones with Wi-Fi (the VoIP-6 and VoIP-12 with their Wi-Fi adapter, and the VoIP-1 handset) can join your office Wi-Fi instead of using a network cable. Set the network once and every phone on your account gets it.

At sign-up

When you order desk phones, the sign-up asks whether they'll use Wi-Fi:

  • Yes, the phones use Wi-Fi: enter the network name and password. Your phones are set up on it before they ship, so they connect as soon as they're plugged into power.
  • Add later: plug the phones into a network cable for now, or add the Wi-Fi in the portal before they ship.
  • Not using Wi-Fi: the phones plug into a network cable.

Changing it later

Go to Account Settings > General > Phone Wi-Fi.

  1. Type the network name and password. Leave the password blank to keep the one already saved, or tick Open network for a network with no password.
  2. Press Save Wi-Fi. Every phone is asked to pick up the change right away.

Remove Wi-Fi takes it off the phones, and Not using Wi-Fi marks the company as using network cables.

Changing your router or Wi-Fi password

Change it here first, before you change the router, so the phones already know the new network. A phone that loses Wi-Fi keeps trying, and can always be plugged into a network cable to pick up the new settings. If your phones go offline after a Wi-Fi change, call support.

Good to know

  • The password is stored encrypted and never shown again once saved.
  • A network cable always wins: a VoIP-6 uses Ethernet when it's plugged in, and Wi-Fi only without a cable.
  • Extensions & Phones shows whether each phone is on Wi-Fi or Ethernet, with the signal strength.
  • The VoIP-1 handset gets these networks too. It has no cable, so when no network is set here it keeps the Wi-Fi it already has.
Was this helpful?
← All help articles