Cannon VoIP Help

What SIP ALG is, and why to turn it off

A router feature that breaks calls more often than it helps.

Updated 1 week ago

SIP ALG is a feature built into many routers and firewalls. It's meant to help phone calls get through, but it rewrites the call's setup messages, and with a modern phone system that usually causes problems:

  • one-way audio, or no audio at all
  • calls that drop part-way through, often after about 30 seconds
  • desk phones that lose their connection

Turn it off

The setting is on your router or firewall, not in the portal. It may be called SIP ALG, SIP helper, SIP inspection or SIP passthrough, and is usually under advanced, firewall or NAT settings. Every brand puts it somewhere different, so if you can't find it, ask whoever set up your network or your internet provider.

Restart the router after changing it, then restart your desk phones so they connect fresh.

The portal's Account Settings > General > Network requirements card lists this along with everything else your network needs. Its link has step-by-step router help.

Was this helpful?
← All help articles