Switch a VoIP-ATA-1 between a fax machine and a phone
Change what an adapter you already added is used for.
The same adapter can run a fax machine or a regular phone. You can change it after it's set up:
- Go to Phone System > Extensions & Phones and open the Phones tab.
- Click the adapter.
- Press Use as a phone line (if it's a fax machine now) or Use as a fax machine (if it's a phone now).
- Pick the extension it should ring, or the fax number it should answer, and press Change.
Moving from fax to phone: faxes to its old fax number go to email from then on. Moving from phone to fax: the adapter picks up the change within a minute or two. Then swap the device plugged into its phone port.
Was this helpful?
