Cannon VoIP Help

Test your emergency setup every month

A 20 minute monthly check: 911 addresses, 911 notifications, weather, panic, groups, doors and webhooks.

Updated 1 week ago

Things change: people leave, phones move, a door key expires. A short monthly check catches it before an emergency does.

1. 911 addresses

  1. In Numbers, check each address under 911 addresses shows Ready.
  2. Dial 933 from a desk phone in each building. It reads back the address and number a 911 call would send. It's free and isn't an emergency call.
  3. The people under Who hears about a 911 call… are told about a 933 call too, marked "E911 TEST - not an emergency." If they weren't told, fix the list.

2. Phone locations

Open Extensions & Phones > Phone map > Locations and check new or moved phones have a building and room. Status & moves lists recent Desk phone moves.

3. A drill panic

  1. On Emergency, turn on drill mode for 15 minutes.
  2. Press a Panic key or dial *95 twice on a desk phone.
  3. Check the responders were rung and the board shows who answered, and that it said DRILL. Nothing goes to 911.
  4. Press All clear.

4. Weather

On Weather, press Send me a test. It says where the test went, and nobody else sees it.

5. Groups

On Groups, check the counts look right, remove people who left, and add new staff to Responders. A responder who has left can't be rung.

6. Doors

On Doors, webhooks & API, press Test on each door system. It checks the key and lists what you can pick, without locking anything. If a system says "The saved key can't be read", press Change, paste the key again and save.

7. Webhooks

Press Send a test on each webhook and check Latest deliveries.

8. Templates

Read each template's preview on Templates. Make sure the one you want is first of each kind, because desk phone *96 alerts use the first.

These are the usual codes. If your company changed them, Phone System > Dialing Guide in the portal shows yours.

Was this helpful?
← All help articles