Using your VoIP-6 desk phone
Transfers (blind and attended), parking, conference calls, voicemail and your PIN, hold, your keys and the codes, on the VoIP-6.
Everything you do on your VoIP-6 every day: answering, transferring, conferences, voicemail and your keys. The codes below are the usual ones; if your company changed any, the Dialing Guide page in the portal lists yours.
Answering and making calls
- Answer: lift the handset, or press Hands-free for speaker or Headset for a headset.
- Call: dial the extension or the number, then press Dial (or just wait a moment). For outside numbers dial the full ten digits.
- Hang up: put the handset down, or press End.
- Switch between handset, speaker and headset during a call: lift the handset, or press Hands-free or Headset.
- Volume: the volume keys change the call's volume during a call and the ringer's volume when the phone is idle.
- Mute: press Mute (it lights red) so the caller can't hear you; press it again to talk. Pressed while the phone rings, it silences the ringer.
- Back out of a screen: the End or Exit softkey.
Hold
Press Hold (or the Hold softkey). The caller hears your company's hold music. Press Hold again, or Resume, to go back to them.
Park a call
Parking puts a caller on hold in a numbered slot, 701 to 720, so anyone in the company can pick them up from any phone.
- During the call, press Transfer (or a Park key, if your administrator gave you one).
- Dial a slot, for example 701, and press Transfer again.
- Tell your colleague the slot ("Mrs. Lopez is on 701"). If that slot is in use, the caller goes to the next free one; the portal and the park keys show where.
To pick the caller up, dial the slot from any phone. If nobody does within a couple of minutes, the call rings you again.
Park keys. A key for a slot is red while a caller is parked there, and blinks once they've waited a minute. During a call, press Transfer and then the key to park the caller in that slot. When the key is lit, press it to pick the caller up.
A second call (call waiting)
You'll hear a short tone and see the second call. Answer it and the first caller goes on hold automatically. Use the up and down arrows to pick a call and press Resume to switch between them.
Transfer a call
There are two ways. Both start with the Transfer key (or the Xfer softkey) during the call.
Blind transfer (send it straight on, no introduction):
- Press Transfer.
- Dial the extension or number (or pick it from the phonebook or call history).
- Press Transfer again. The call goes to them and your phone hangs up.
Attended transfer (talk to them first, sometimes called a warm or normal transfer):
- Press Transfer. The caller goes on hold.
- Dial the extension or number and press Dial.
- When they answer, introduce the caller ("I have Mrs. Lopez on the line about her appointment").
- Press Transfer to hand the call over. If they can't take it, press End and then Resume to go back to your caller.
You can also press Transfer while their phone is still ringing to send the call on without waiting for them to answer.
To send a caller to someone's voicemail, transfer the call to them and let it ring through to voicemail, or ask your administrator about a voicemail key.
Conference call (three-way)
- During the call, press the Conference key (or the Conf softkey). The first caller goes on hold.
- Dial the third person and press Dial.
- When they answer, press Conf again. All three of you are talking.
During the conference, Split separates the calls again and End ends it. For more than three people, or a call people dial in to, use a meeting or a conference bridge from the portal.
Voicemail
The message light on the phone lights up when you have a new voicemail.
- Check it: press the Message (voicemail) key, or dial *\98**.
- If your mailbox has a PIN, you'll be asked for it: type it and press #.
- Each message plays. Press 7 to erase it, 9 to save it, or # for the next one. These work while the message is playing.
Setting or changing your voicemail PIN from the phone:
- Dial *\98 (or press Message**).
- While it tells you how many messages you have, press 0. (With no messages, it offers this out loud: press 0.)
- Type a new PIN of 4 to 8 digits and press #, then type it again and press #.
A PIN can't be your extension number, one digit repeated, or a run like 1234. The same PIN works when you check your voicemail from outside, by calling your own number and pressing \* during your greeting, or through dial-in. You can also set it in the portal under Extensions & Phones, or ask your administrator.
Your voicemail greeting is set in the portal: Extensions & Phones, your extension's Greeting (or ask your administrator).
Your keys
The keys beside the screen are set up by your administrator: a person's name, a speed dial, a park slot, a ring group, or a shared line.
- A person's key (busy lamp): green means they're free, red means they're on a call, and red flashing means their phone is ringing. Press it to call them; while it flashes, press it to answer their ringing call.
- A ring group or queue key: blinks while a caller is waiting; press it to take the caller who has waited longest.
- Page key: shows the next page of keys when you have more keys than fit on the screen.
Call history and redial
- Redial: press Redial to call the last number you dialed.
- Call history: Press Call log (or the up arrow). Use the left and right arrows to switch between missed, received and dialed calls, then press Dial to call back. You can also dial *\69** to call back the last person who called you.
Do Not Disturb, forwarding and other codes
- Do Not Disturb: dial *\78 to turn it on and \79* to turn it off. Your status changes in every app too, so use these rather than the phone's own DND button.
- Forward all your calls: dial *\72* and then the number (or just \72 to send everything to voicemail). Dial *\73** to stop.
- Pick up a call ringing nearby: *\8 takes the call ringing longest in your pickup group; \\* and an extension (for example \\*104) answers a particular phone.
- Pick up a parked call: dial its slot, 701 to 720 (see Park a call above).
- Intercom: *\80** and an extension opens their speaker so you can talk without them picking up.
- Cannon AI Assistant: dial 610 to talk to your own assistant, if your company has it.
- Your support code: dial 612 and the phone reads it out twice.
- The time: *\60**.
If something isn't right
- No dial tone, or "No Service" at the top: check the network cable is in the port marked with the network symbol (not the PC port), then unplug the power for ten seconds and plug it back in.
- Not assigned at the top: the phone isn't set up for anyone yet. Your administrator assigns it on Extensions & Phones.
- A key's lamp stays dark: the phone reconnects its keys within five minutes. If it's still dark after that, restart the phone.
- The caller can't hear you: check Mute isn't lit, and try the handset in case the headset is the problem.
